Medical Electronics PCBA board
CAPABILITIES
● -Layer Count: 2L/4L/6L/8L/10L
● -Max. Delivery Panel Size: 699mm×594mm
● -Max. Copper Weight (Inner/Outer Layer): 12oz
● -Max.Board Thickness: 5.0mm
● -Max. Aspect Ratio: 15:1
● -Surface Finish: LF-HASL, ENIG, Imm-Ag, Imm-Sn, OSP, ENEPIG, Gold Finger
PCB structure characteristics
1. Circuit and pattern (Pattern): The circuit is used as a tool for conducting between components. In the design, a large copper surface will be designed as a grounding and power supply layer. Lines and drawings are made at the same time.
2.Hole (Throughole/via): The through hole can make the lines of more than two levels conduct each other, the larger through hole is used as a component plug-in, and the non-conductive hole (nPTH) is usually used as the surface Mounting and positioning, used for fixing screws during assembly.
3.Silkscreen (Legend/Marking/Silkscreen): This is a non-essential component. Its main function is to mark the name and position box of each part on the circuit board, which is convenient for maintenance and identification after assembly.
PCBA technical Capacity
| SMT | Position accuracy:20 um |
| Components size:0.4×0.2mm(01005) —130×79mm,Flip-CHIP,QFP,BGA,POP | |
| Max. component height::25mm | |
| Max. PCB size:680×500mm | |
| Min. PCB size:no limited | |
| PCB thickness:0.3 to 6mm | |
| PCB weight:3KG | |
| Wave-Solder | Max. PCB width:450mm |
| Min. PCB width: no limited | |
| Component height:Top 120mm/Bot 15mm | |
| Sweat-Solder | Metal type :part, whole, inlay, sidestep |
| Metal material:Copper , Aluminum | |
| Surface Finish:plating Au, plating sliver , plating Sn | |
| Air bladder rate:less than 20% | |
| Press-fit | Press range:0-50KN |
| Max. PCB size:800X600mm | |
| Testing | ICT,Probe flying,burn-in,function test,temperature cycling |
FAQ
Basically NO MOQ For Most Prooducts, Trail Oeder Or Sample Order Will Be Acceptable.
Most Of Our Products Are With 6 Months Quality Warranty.
Customized Logo For Products Or Package Will Be Highly Welcomed.We Made A lot For Our Customers.
Pls Confirm With Us The Modle You Need.And The Sample Fee Will Be Refunded In Bulk.
Sample Will Be Send Out Within 2days After Received Payment.
Normally It Takes 5 Working Days After Received Payment.
100% QC Before Shipment. If There're Some Unexpected Problem Happan, Like Quality Problem
